The figure manufacture technique introduced here is the peculiar method which probably does not have a parallel in others in the world that used. This method, applicable to other general modeling not only figures, is realized by unifying the material with plastic - though it is the most fundamental material for modern modeling. Make a figure of plastic. By ordinary thinking, this is a very serious thing. For example, the case of remodeling with 1/35 scale figure, after deleting the unnecessary portion of the original kit, it is the common knowledge that the insufficient portion is filled by putty. In such way there is no turn of plastic. So I perceived that "plastic melts with heating" -- although everyone understands this fact -- and how enough formation can be performed ... What realized it is the invention of the tool "Heat-Pen" and development of the attachment bits suitable for processing of plastic. The advantage of high detail reproducibility, higher strength, ease of pause changing, few material loss nearly zero, no worry about contraction, and above all, it's work is no-waiting. I think that my mission is bringing a true revolution to the molding work by these overwhelming performance. Since the Heat-Pen is going to be commercialization, I can't explain about the details, here I report the Heat-Pen method as the form of modeling article, mainly introduction of the models.

CONTENTS

	CF29-05 "Electric Jungle" Lum garage kit building manual Finaly I intruded the forbidden ground! What a thing my first garage kit building is my original work! Anyhow, I kept waiting the persons concerned. (Here, there is no turn of the Heat-Pen.)
	CF05-85 (Surfboard Lum) making report (J) Do you think 1/8 is small? If it becomes large more than this, the merit of this method may be decrease. The stiffness of the body is like the blunt weapon.
	CF05-101 (Thief of bikinis Lum) making report (J) Is it the easiest to make about 1/12 scale. It doesn't not trouble with the space either. I was particular with some details such as transplantation of eyelashes etc..
	RF-YM01 (Yamada Mariya) making process (J) I challenged first real figure. "The ponytail was made in this way!! " I had pain also with the polka dots of the camisole. For real work, it is hard that deception of the name of writer nature is not accepted at all.
	Making scenery of other figures (J) For reference, uncompleted figures and sight of my desktop etc .. The technical hint about molding & paint may be found.
	Making process of old figures (J) In those days (the 1980s), I used an ordinary soldering iron with slide-trans, and I used it having changed only the bit (tip). The sizes of works are also small such as 1/20 scale.
	The collection of figure drawings (J) If the measurement has decided before making, you doesn't need worries about the proportion later. But I do pause correction at many times.